INTL 3:770/1 3:770/3
REPLYADDR kjambrose@gmail.com
REPLYTO 3:770/3.0 UUCP
MSGID: <53b48b2d-4035-4b0c-bb7c-d3de53a0ff04n@googlegroups.com> 63b7a417
REPLY: b94921a5
PID: SoupGate-Win32 v1.05
On Saturday, May 7, 2022 at 10:28:11 PM UTC-7, Paul Förster wrote:
> Hi Kenzo,
> On 08. May, 2022 at 05:57:00 CEST, "Kenzo" wrote:
> > The 1571 won't power up but using the same power supply the 1541 II works
> > fine. And the second 1541 also works fine. So I have two drives working,
but
> > not the 1571 yet.
> I'm not sure that you can use a 1541-II power supply with a 1571. I'd do
some
> research before trying that because a bad power supply can not only not
power
> up the attached device correctly but it can kill it. So I'd be careful when
> trying a Commodore power supply with a different device than what it was
built
> for. You should basically always assume that Commodore power supplies are
NOT
> interchangeable between devices.
> > And I had 4 computers in storage, a 64 and three original type128s. The 64
> > powers up, but composite connected monitor is blank. I have to do some
> > research for that. Maybe the 64 does not output composite video?
> The C64 has a composite signal. It's pin 4 of the connector.
>
> See: http://www.hardwarebook.info/C128/C64C_Video
>
> But your VIC chip may be fried (or the monitor of course). Or it may suffer
> from a bad connection. It's hard to say without detailed info. I suggest
> taking the VIC chip out and clean the contacts, then put it back in. This
can
> be easily done if the chip sits in a socket. If it's soldered in then you
may
> have some soldering to do. But instead of soldering it back in I would put
in
> a socket.
> > The three 128s all work fine. Next I will try the two 1764 ram expansion
> > modules. The one I have that was boxed comes with a commodore higher
powered
> > power supply. I will check the output voltages before powering up with it.
> I can't comment on the 1764. I never had one of those.
> > So now that I can read disks, I guess the next step is to clean and lube
the
> > drives, and then figure out a way to convert the physical floppies to .d64
> > files, since I don't expect the drives to work forever.
> Most things are on the web already in d64 format. You'd have to search hard
> for some things, though. But if you want to do the conversion yourself, then
> there are several options, of which I can recomment two:
>
> 1) if you want to do it on the C64/C128, then use method 4 of:
>
> https://diginoodles.com/writing/media-production/transferring-
ommodore-64-disks-to-modern-formats
>
> 2) get a Star Commander cable and connect the drive to a PC running DOS.
Then
> you can use the Star Commander:
> https://sta.c64.org/sc.html
>
> Though the second option is very comfortable and reminiscent of the well
known
> Norton Commander, it requires an old PC running DOS and having a parallel
> port. You'd also need to aquire one of the X1541 flavor of cables. It's all
> documented on the Star Commander homepage.
>
> Hope this helps.
>
> Cheers
> Paul
Zoomfloppy? Looks great for converting physical floppies to D64 copies in
windows and reverse?
--- SoupGate-Win32 v1.05
* Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)
SEEN-BY: 1/123 15/0 18/200 90/1 105/81 106/201 120/340 123/131 129/305
SEEN-BY: 129/330 331 153/7715 218/700 226/30 227/114 229/110 111 206
SEEN-BY: 229/317 400 424 426 428 470 664 700 266/512 282/1038 301/1
SEEN-BY: 317/3 320/219 322/757 342/200 396/45 460/58 633/267 280 712/620
SEEN-BY: 712/848 770/1 3 100 340 772/210 220 230
PATH: 770/3 1 712/848 229/426
|
