INTL 3:770/1 3:770/3
REPLYADDR brain@jbrain.com
REPLYTO 3:770/3.0 UUCP
MSGID: 3cef04df
REPLY: <18f5ee03-59ae-40a3-81c9-6e3c1c6707d2n@googlegroups.com> 2fec8c18
PID: SoupGate-Win32 v1.05
On 6/16/2021 9:01 AM, David Hoelzer wrote:
> Hiya!
>
> I just purchased a ROM image set from RetroInnovations (I have emailed them
and am still waiting for a response) for the 128-DCR. The problem I have is
that they come with absolutely no documentation.
I have to disagree with that statement. Every ZIP file, including the
C128DCR file comes with a file called: ROM Creation README.txt. In it,
it says:
ROM creation requires a EPROM/FLASH/EEPROM programmer and suitable stock:
(EPROM, EEPROM, FLASH). It is beyond the scope of this document to explain
programming steps. Consult your user manual for programming information.
The non-JiffyDOS CBM files can be found at
ftp://www.zimmers.net/pub/cbm/firmware/drives/new/
The non-JiffyDOS non-CBM files are typically available at Zimmers as well,
but can also be read from your existing drive ROM(s)
Jim Brain
RETRO Innovations
--------------------------------------------------------------------------
Switched C128/C128DCR KERNAL ROM (32kB)
basic.901226-01.bin
kernal.901227-03.bin
kernal.318020-05.bin
basic.901226-01.bin
JiffyDOS_C64_6.01.bin
JiffyDOS_C128DCR_6.01.bin
I will admit the size is wrong (a switched unit requires 64kB EPROMs,
but everything else is there.
Jim
--
Jim Brain, brain@jbrain.com
RETRO Innovations: Contemporary Gear for Classic Systems
www.go4retro.com
--- SoupGate-Win32 v1.05
* Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)
SEEN-BY: 1/123 14/0 18/200 90/1 105/81 120/340 123/131 129/305 226/30
SEEN-BY: 227/114 229/424 426 428 700 1016 1017 240/5832 249/1 206
SEEN-BY: 249/317 400 261/38 282/1038 298/25 26 301/1 317/3 322/757
SEEN-BY: 342/200
PATH: 770/3 1 153/757 221/6 301/1 229/426 317/3 298/25 14/0 229/426
|
