INTL 3:770/1 3:770/3   
   REPLYADDR dropnine@gmail.com   
   REPLYTO 3:770/3.0 UUCP   
   MSGID: <63cb91aa-3326-424f-bf6c-9b3386fefa03n@googlegroups.com> d4eac227   
   PID: SoupGate-Win32 v1.05   
   Hi,   
      
   I updated my Raspberry Pi tcp serial bridge image with the compile of the   
   newer source and updated OS.  I use it with a 10 year old RPi B+, C128, and   
   turbo232 cart., and a max232 interfaced with the RPi's GPIO (it will also   
   accept a decent usb to serial,    
   as well) -- the image should work thru to RPi 3, I would figure.  I haven't   
   tested it with RPi4.    
      
   It's just a minimal linux install with tcpser. This image is fault tolerant   
   and runs tcpser under systemd; enable, disable, restart, stop, start, status,   
   etc all work fine.  sshd is turned on by default so you control it remotely on   
   your network.   
      
   Read the document and have fun with it.  It's located here if you want it:   
      
   https://drive.google.com/drive/folders/11uIrvQUFmcpSXExso47Vgdgi   
   IBlJNu9?usp=sharing   
      
   Cheers,   
   ~ c   
      
   --- SoupGate-Win32 v1.05   
    * Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)   
   SEEN-BY: 1/19 123 16/0 19/10 57/0 90/1 120/340 123/130 131 132/174   
   SEEN-BY: 153/0 135 250 757 802 6809 154/10 203/0 220/70 221/0 1 6   
   SEEN-BY: 221/360 226/17 30 227/114 229/101 275 424 426 664 1016 230/0   
   SEEN-BY: 240/5138 5411 5832 5853 249/1 206 317 400 261/38 267/800   
   SEEN-BY: 280/5003 310/31 317/3 320/119 219 319 322/0 757 335/364 340/1000   
   SEEN-BY: 342/17 200 423/81 633/280 640/1384 712/848 770/0 1 3 100   
   SEEN-BY: 770/340 772/0 1 210 220 230 2432/390 2454/119 4500/1   
   PATH: 770/3 1 153/757 221/6 1 320/219 240/5832 229/426