INTL 3:770/1 3:770/3   
   REPLYADDR charlesgutman@gmail.com   
   REPLYTO 3:770/3.0 UUCP   
   MSGID: <692dd88a-b883-4cd5-a1ae-64ee339c28c9o@googlegroups.com> 8a47d7d4   
   REPLY:  5d9048ea   
   PID: SoupGate-Win32 v1.05   
   On Tuesday, August 18, 2020 at 12:02:53 PM UTC-7, Robert Roland wrote:   
   > On Mon, 17 Aug 2020 21:40:48 -0700 (PDT), Charles Gutman   
   >  wrote:   
   >   
   > >Does anyone h or ppen to know where I may locate a thin enclosure for the   
   user port connector end near the C64?   
   >   
   > Would a 3D printed one be acceptable?   
   >   
   > There are models available for free download. For example:   
   > https://www.thingiverse.com/thing:3368773   
   > --   
   > RoRo   
      
    Actually I'm not skilled enough to work this concept. I was just thinking of   
   a minor 1 timer project with two pieces of thin plastic with 4 corner holes   
   drilled in it to cover my telnet cable end.   
      
   Thank you   
      
   Charles   
      
   --- SoupGate-Win32 v1.05   
    * Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)   
   SEEN-BY: 1/19 123 16/0 19/10 57/0 90/1 120/340 123/130 131 132/174   
   SEEN-BY: 153/0 135 250 757 802 6809 154/10 203/0 220/70 221/0 1 6   
   SEEN-BY: 221/360 226/17 30 227/114 229/101 275 424 426 664 1016 230/0   
   SEEN-BY: 240/5138 5411 5832 5853 249/1 206 317 400 261/38 267/800   
   SEEN-BY: 280/5003 310/31 317/3 320/119 219 319 322/0 757 335/364 340/1000   
   SEEN-BY: 342/17 200 423/81 633/280 640/1384 712/848 770/0 1 3 100   
   SEEN-BY: 770/340 772/0 1 210 220 230 2432/390 2454/119 4500/1   
   PATH: 770/3 1 153/757 221/6 1 320/219 240/5832 229/426