I have a clear C64c case from the Kickstarter[1] project. It has plastic   
   filling the LED hole and one of the screw holes in the top half.   
   According to the project page, a lot of other people have these problems   
   too.  I'm unsure about being able to get a replacement, so it seems to   
   be on me to fix it.  The screw hole is easy to fix with a drill bit.   
   The rectangular LED hole is trickier and I'm unsure if I can get a   
   replacement.  Does anyone here have anything to say about opening up   
   that hole with a Dremel?   
      
   [1] https://www.kickstarter.com/projects/1670214687/original-com   
   odore-64c-computer-housing-in-new-coo   
      
   --   
   David Griffith   
   davidmylastname@acm.org   <--- Put my last name where it belongs   
      
   --- SoupGate-Win32 v1.05   
    * Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)