fredag 12. september 2014 15.33.32 UTC+2 skrev Jeff Gregory følgende:   
   > On Thu, 11 Sep 2014, retroray....@gmail.com wrote:   
   >    
   > >     So, how do we fix the problem? Inside the video cage, just to the right   
   > > of the VIC chip, I connected a 100 ohm resistor across R10 to bring the   
   > > video level up where it belongs. Easy and quick. This old board now looks   
   as   
   > > good as the later version C64's.   
   > >   
   > > Ray   
   >    
   > I have this problem on my Rev. A motherboards w/ 5-pin video connector as    
   > well. Saw a YouTube vid about replacing the electrolytic caps inside the RF    
   > modulator but this seems much easier.   
   >    
   > Thanks for the tip!   
   >    
   > Jeff   
      
   One of my youtube-channel viewers wanted to improve his picture. He told me he   
   had the 5 pin video connector and PCASSY 326298 REV A 1982. NTSC. It had been   
   sitting in a warehouse for 30+ years (!), and yes it had the R10 300 ohms   
   resistor. I asked him    
   to replace it and it gave better picture. Let me know if you'd like me to ask   
   him more about the serial no etc.   
      
   His picture before   
   http://pixs.ru/showimage/image300oh_5685260_20066732.png   
      
   and after replacing the r10 with 120 ohms resistor. He says it looks better   
   than on his camera though.   
   http://pixs.ru/showimage/image100oh_5373405_20066734.png   
      
   My channel:   
   https://www.youtube.com/user/bbytew   
      
   --- SoupGate-Win32 v1.05   
    * Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)