REPLY: 1:229/307 e858bb6d   
   MSGID: 2:5015/46 659f3a9a   
   CHRS: CP866 2   
   TZUTC: 0300   
   TID: hpt/lnx 1.9.0-cur 2021-05-15   
   Hello, Mick!   
      
   Wednesday January 10 2024 19:13, from Mick Manning -> Louis Northmore:   
      
    LN>> What's the correct way to configure a link without a pkt   
    LN>> password? Currently I have the following setup but doesn't let   
    LN>> them connect:   
      
    MM> Hi. You have to arrange with your uplink as to if you need a PKT,or   
    MM> TIC password set, as well as the usual session password.   
      
   No passport, no link. Pretty obviously, cause your files will end up in the   
   non-password inbound aka unprotected, whatever it is called in husky.   
      
   Best Regards, Nil   
   --- GoldED+/LNX 1.1.5   
    * Origin: Linux 2.6.32-042stab145.3 (2:5015/46)   
   SEEN-BY: 10/0 1 15/0 90/1 102/401 103/1 705 105/81 106/201 124/5016   
   SEEN-BY: 128/260 129/305 134/100 135/225 153/135 143 757 802 7083   
   SEEN-BY: 153/7715 154/10 30 203/0 214/22 218/0 1 215 601 700 720 820   
   SEEN-BY: 218/840 860 870 880 930 221/0 1 6 226/30 227/114 229/110   
   SEEN-BY: 229/112 113 200 206 275 307 317 426 428 470 550 664 700 240/1120   
   SEEN-BY: 240/5832 266/512 280/464 5003 5555 282/1038 291/111 292/854   
   SEEN-BY: 292/8125 301/1 310/31 320/219 322/757 335/364 341/66 234   
   SEEN-BY: 342/200 396/45 423/120 460/58 463/68 467/888 633/280 712/848   
   SEEN-BY: 770/1 5000/111 5001/100 5005/49 5015/46 5020/400 828 846   
   SEEN-BY: 5020/1042 4441 5030/49 5053/51 5054/8 5058/104 5061/133 5080/102   
   SEEN-BY: 5083/444   
   PATH: 5015/46 5020/1042 221/6 153/757 280/464 103/705 218/700 229/426