TID: FMail-W32 2.2.0.0   
   RFC-X-No-Archive: Yes   
   TZUTC: 0200   
   CHRS: CP850 2   
   MSGID: 2:280/5555 64c60d03   
   REPLY: 2:221/6.0 64c5f2ba   
   Hello Paul,   
      
   Sunday July 30 2023 08:18, Tommi Koivula wrote to you:   
      
    >> Can I set BinkD to listen on two ports at the same time?   
    >> Ideally traffic that is sent to an IPv6 address.   
      
    TK> Sure, just like:   
      
    TK> listen :24554   
    TK> listen :24555   
      
    TK>  or:   
      
    TK> listen f10.n221.z2.rbb.fidonet.fi:24554   
      
   Be aware that if you specify a listen command, the default of listening to all   
   adresses on both IPv4 and IPv6 will be disabled. So if you specify:   
      
   listen ipv6address.example:24554   
   listen ipv6address.example:24555   
      
   You have to explicitly add a listen command for IPv4 unless it is an IPv6 only   
   node:   
      
   listen 0.0.0.0:24555   
      
   Maybe the simplest way in your case (3:770/100) is:   
      
   listen agency6.bbs.nz:24554   
   listen [::]:24555   
   listen 0.0.0.0:24555   
      
      
   Cheers, Michiel   
      
   --- GoldED+/W32-MSVC 1.1.5-b20170303   
    * Origin: http://www.vlist.eu (2:280/5555)   
   SEEN-BY: 1/123 10/0 1 15/0 30/0 80/1 90/1 102/401 103/1 705 105/81   
   SEEN-BY: 106/201 114/709 123/131 129/305 153/7715 154/10 203/0 214/22   
   SEEN-BY: 218/0 1 215 700 720 820 840 860 880 221/1 6 226/30 227/114   
   SEEN-BY: 229/110 112 113 200 206 275 307 317 426 428 470 550 664 700   
   SEEN-BY: 240/1120 266/512 280/464 5003 5555 282/1038 291/111 292/854   
   SEEN-BY: 301/1 113 123 708 812 317/3 320/219 322/757 341/66 342/200   
   SEEN-BY: 396/45 460/58 633/280 712/848 5019/40 5020/1042 5053/58 5075/35   
   PATH: 280/5555 301/1 218/700 229/426