TID: FMail-lnx64 2.1.0.18-B20170815   
   RFC-X-No-Archive: Yes   
   TZUTC: 0100   
   CHRS: UTF-8 2   
   PID: GED+LNX 1.1.5-b20161221   
   MSGID: 2:280/464 61e95ac8   
   REPLY: 1:3634/12.73 61e95151   
   Hi mark,   
      
   On 2022-01-20 07:10:54, you wrote to Oli:   
      
    ml> as a test i stopped my binkd, edited my startup script to remove the   
    ml> "-C" option, and restarted it... then i edited my binkd-networks.conf   
    ml> file which is included as previously shown... 5 minutes later and   
    ml> binkd still has not noticed the change contrary to what the FAQ's last   
    ml> paragraph above states about the configs being re-read   
    ml> automatically...   
      
   I use a self compiled binkd:   
      
   # binkd -vv   
   Binkd 1.1a-111 (May 27 2020 16:10:25/Linux)   
   Compilation flags: gcc, zlib, bzlib2.   
   Facilities: fts5004 ipv6   
      
   I start it with '-Cq' options, and a 'rescan-delay 3' in the config (not '3s'   
   btw!). It never crashes when I edit one of the config files, and never did so   
   with older versions...   
      
      
   Bye, Wilfred.   
      
   --- FMail-lnx64 2.1.0.18-B20170815   
    * Origin: FMail development HQ (2:280/464)   
   SEEN-BY: 1/123 15/0 90/1 103/705 105/81 106/201 114/705 709 120/340   
   SEEN-BY: 123/120 131 124/5016 129/305 330 153/250 757 7715 154/10   
   SEEN-BY: 203/0 218/840 220/70 221/0 226/17 30 227/114 229/110 200   
   SEEN-BY: 229/307 317 424 426 550 664 700 240/5832 249/206 250/5 8   
   SEEN-BY: 266/512 267/800 280/464 5003 5555 282/1038 292/854 8125 298/25   
   SEEN-BY: 301/1 305/3 310/31 317/3 320/219 322/757 341/234 342/200   
   SEEN-BY: 396/45 423/120 460/58 633/280 712/848 770/1 100 340 772/210   
   SEEN-BY: 772/220 230 2452/250   
   PATH: 280/464 770/1 317/3 229/426