TZUTC: -0400   
   MSGID: 1082.binkd@1:2320/105 24ffc0e9   
   REPLY: 14.fidonet_binkd@1:142/103 24ff1e22   
   PID: Synchronet 3.18c-Linux master/dcb003099 Dec 31 2020 GCC 7.5.0   
   TID: SBBSecho 3.12-Linux master/dcb003099 Dec 31 2020 GCC 7.5.0   
   BBSID: CAPCITY2   
   CHRS: ASCII 1   
   > -=> Paul Hayton wrote to All <=-   
      
   >  BR> /path/to/iptables -I INPUT 1 -s x.x.x.x -p tcp --dport 24554 -j DROP   
   >  BR> where x.x.x.x = remote IP.   
      
   >  PH> Many thanks for the info / help :)   
      
   > Glad to offer the assistance. Scripts like fail2ban are "ok" but one really   
   > should learn the apps that scripts such as those control. If you wish to   
   > block an IP from accessing anything on your box, drop from the "-p .. to   
   24554   
   > of the above line. If you just wish to append the filter you can use -A   
   > instead of -I too. If your bink is running on a different port than change   
   > the --dport to what your bink is.   
      
   How would you format it if you want to drop a whole range or block of IP   
   addresses?   
      
   Thanks!   
   Mike   
   --- SBBSecho 3.12-Linux   
    * Origin: capitolcityonline.net * Telnet/SSH:2022/HTTP (1:2320/105)   
   SEEN-BY: 1/123 30/0 80/1 90/1 105/81 114/709 120/340 457 616 123/10   
   SEEN-BY: 123/131 129/215 305 154/10 30 40 50 700 203/0 220/80 90 221/1   
   SEEN-BY: 221/6 226/30 227/114 201 229/101 200 310 424 426 550 664   
   SEEN-BY: 229/700 1016 1017 240/1120 5832 249/109 206 307 317 261/38   
   SEEN-BY: 280/464 282/1038 292/854 301/0 1 101 103 113 123 812 322/757   
   SEEN-BY: 341/66 342/200 633/280 712/848 2320/0 105 195 304 3634/12   
   SEEN-BY: 5020/1042 5058/104   
   PATH: 2320/105 154/10 301/1 229/426