TID: Mystic BBS 1.12 A46   
   MSGID: 1:340/1000 cc4cb364   
   REPLY: 1:153/757 5eae7178   
   TZUTC: -0700   
    AI>  DL> domain amiganet    d:\fe\outbound\amiga_out 39   
    AI> My tosser is not 5D so I have my zone listed as 1 for all my domain   
    AI> lines and they all point to a single outbound, something like this..   
    AI> domain fidonet d:\\fe\\outbound 1   
    AI> domain fsxnet d:\\fe\\outbound 1   
      
   That was my 1st question when I started putting this together.   
      
    AI> Also, I think you'll need to escape those paths in the OS/2 or windows   
    AI> version like so.   
    AI> d:\\fe\\outbound   
      
   Have seen this happen just a time or two before while working with Mystic. Am   
   going to get it changed out.   
      
    AI>  DL> inbound d:\fe\inbound\wwiv_in   
    AI> I also just have one inbound..   
    AI> inbound d:\\fe\\inbound   
    AI> inbound-nonsecure d:\\fe\\inbound\\insecure   
    AI> inbound-temp d:\\fe\\inbound\temp   
      
   This was something else I was wondering about. As Picard says...will make it   
   so.   
      
   Again...thank you so much for the help/suggestions. Everything helps!   
      
   ACME BBS-Member of fsxNet/WWIVNet/SciNet/AmigaNet/VKRadio/FidoNet/MicroNet.   
      
   --- Mystic BBS v1.12 A46 2020/04/21 (Windows/32)   
    * Origin: ACME BBS-W.Coyote & D.Brown are our best users.  (1:340/1000)   
   SEEN-BY: 1/123 90/1 120/340 601 220/50 226/30 227/114 702 229/100   
   SEEN-BY: 229/101 200 426 664 1014 240/5832 249/109 307 317 292/854   
   SEEN-BY: 342/200   
   PATH: 340/1000 770/1 280/464 229/101 426