TZUTC: -0400   
   MSGID: 767.fido-binkd@1:3634/12 2313ee44   
   REPLY: 1:340/1000 c0a22aa9   
   PID: Synchronet 3.18a-Linux  Apr 30 2020 GCC 7.5.0   
   TID: SBBSecho 3.11-Linux r3.170 Apr 30 2020 GCC 7.5.0   
   CHRS: ASCII 1   
   NOTE: FSEditor.js v1.104   
     Re: Worked on this earlier after work this evening...   
     By: Don Lowery to All on Sat May 02 2020 22:06:24   
      
      
    DL> # Number @ end is the root zone   
    DL> domain fsxnet      d:\fe\outbound\fsx_out 21   
    DL> domain wwivftn     d:\fe\outbound\wwiv_out 11   
    DL> domain scinet      d:\fe\outbound\sci_out 77   
    DL> domain spooknet d:\fe\outbound\spook_out 700   
    DL> domain micronet d:\fe\outbound\micro_out 618   
    DL> domain fidonet     d:\fe\outbound\fido_out 1   
    DL> domain vkradio     d:\fe\outbound\vk_out 432   
    DL> domain amiganet    d:\fe\outbound\amiga_out 39   
      
   the above is for full 5D BSO... if your tosser is not also full 5D, it will   
   not work properly...   
      
   if your tosser is only 4D BSO, then all the above paths need to be the same   
   with the zones as you have specified... most FTN mail tossers are only 4D   
   capable...   
      
   if your tosser uses the other form of 5D BSO, then the paths can be like you   
   have them but the zones all have to be 1 so the directories get the hex   
   extension added to them...   
      
      
   )\/(ark   
   --- SBBSecho 3.11-Linux   
    * Origin: SouthEast Star Mail HUB - SESTAR (1:3634/12)   
   SEEN-BY: 1/123 90/1 120/340 601 220/50 226/30 227/114 702 229/100   
   SEEN-BY: 229/101 200 426 664 1014 240/5832 249/109 307 317 292/854   
   SEEN-BY: 342/200   
   PATH: 3634/12 154/10 280/464 229/101 426