AREA:BINKD   
   MSGID: 1:229/101 754944a7   
   REPLY: 4:900/106 12d2b4e0   
   TZUTC: -0400   
   TID: hpt/lnx 1.9.0-cur 2019-12-05   
    TO> I have a question , im use Binkd DOS bases on version 0.9.5a/DOS, it   
    TO> took me a long long time to configure the IBM TCP/DOS since the   
    TO> configuration is tricked ( it did no solve internet names and Binkd/DOS   
    TO> can only be used on that network ) , my question if it whas ever tought   
    TO> to do it using a packet driver , right now i'm using a PC 386 DX40mhz,   
    TO> DOS 6.22, 8MB RAM, NE2000 compatible Network Card ( I also use a Binkd   
    TO> Win/16 with Windows 3.11 )   
      
   So I use a pure DOS setup as well (MSDOS 6.22, Desqview/QEMM, QuickBBS,   
   FMAIL) and I ported binkd to using wattcp and DJGPP a few weeks back. So it's   
   version based off version 1.1 and I've used it for awhile and seems stable. I   
   used it with a packet driver and it's had no issues at all.   
      
   I've never officially published a binary but the source is on my github   
   account. I'm not sure where I would distribute such a binary aside from my BBS   
   or I guess my github account.    
      
   github.com/mynameistroy   
      
   I suppose publishing it through the filebone is also an option.   
      
   I've also starting porting the latest fmail back to DOS as well again via   
   DJGPP so maybe in a bit I'll have a new version of that to publish.    
      
   --- Mystic BBS v1.12 A46 2020/04/13 (Linux/64)   
    * Origin: % disksh0p!bbs % bbs.diskshop.ca % SciNet ftn hq % (1:229/101)   
   SEEN-BY: 1/123 90/1 220/50 226/30 227/114 229/100 101 200 426 1014   
   SEEN-BY: 240/5832 249/109 307 317 280/464 292/854 342/200   
   PATH: 229/101 426