JS>>> Okay, I have my binkd running. I was having issues with domains... I   
    JS>>> used the stock domains, for the most part... slight alterations.   
      
    JS>>> I need some help with adding in nodes or uplinks in my binkd.cfg   
    JS>>> file...   
      
    JS>>> What do I need to add there...   
      
      
      
    JM>> Here's from my config. Your paths and network names may   
    JM>> vary...   
      
    JM>> domain fidonet /fido/outbound 2   
    JM>> domain amiganet /fido/amiganet 2   
    JM>> domain fsxnet /fido/fsxnet 2   
      
    JM>> address 2:201/120@fidonet   
    JM>> address 39:160/242@amiganet   
    JM>> address 21:2/130@fsxnet   
      
    JM>> My upstream fidonet hub:   
      
    JM>> node 2:201/0.0@fidonet :    
      
    JM>> For example:   
      
    JM>> node 2:201/0@fidonet bejo.dyndns.org:9090   
    JM>> oursecretpassword   
      
    JM>> Binkd understands to send the right mail to the right hub   
    JM>> via the @domain value (specified earlier in the config   
    JM>> file, see above) so if you have FSXNet for example, you   
    JM>> enter it like this:   
      
    JM>> node 21:2/100@fsxnet error404bbs.ddns.net:24555   
    JM>> oursecretpassword   
      
    JM>> The routing itself is done by the tosser software. I use   
    JM>> Crashmail II for this and I tell it that all packages for   
    JM>> 21:*/*.* will go to 21:2/100 and then Binkd will pick   
    JM>> that up and send it to 21:2/100.   
      
    JS> I have things setup, a lot like yours, but mail doesn't seem to send   
    JS> to the BBS.   
      
    JS> Before I made changes to the binkd.cfg file mail would transfer   
    JS> over.... As soon as I personalized it mail does not transfer...   
    JS> Here's my Internet Rex Log   
      
    JS> :Star   
    JS> ----------  Manual fetch: 201   
    JS> % 17:52:16  (3) Starting event.   
    JS> % 17:52:16  (3) Done.   
    JS> - 17:52:16  (1) Performing inbound mail scan.   
    JS> % 17:52:16  (1) Starting thread 0 (4, 1, 25150)   
    JS> % 17:52:16  (5) Connecting to BinkP site 192.168.0.10...   
    JS> % 17:52:16  (5) BinkP: OPT CRAM-MD5-9409d5d28835c94d447cada60594c3ee   
    JS> % 17:52:17  (5) BinkP: SYS Joe's BBS   
    JS> % 17:52:17  (5) BinkP: ZYZ IB JOE   
    JS> % 17:52:17  (5) BinkP: LOC Edmonton, AB Canada   
    JS> % 17:52:17  (5) BinkP: NDL 115200,TCP,BINKP   
    JS> % 17:52:17  (5) BinkP: TIME Mon, 15 Oct 2018 17:52:15 -0600   
    JS> % 17:52:17  (5) BinkP: VER binkd/1.0.4/Linux binkp/1.1   
    JS> % 17:52:17  (5) BinkP:  1:342/201.1@fidonet   
    JS> ? 17:52:17  (5) BinkP error from remote: Secure AKA 1:342/200@fidonet   
    JS> busy   
    JS> % 17:52:17  (1) Task 0 is done.   
    JS> * 17:52:17  (1) Received 0 files (0K)   
    JS> % 17:52:17  (1) System: BETWEEN.CMD   
    JS> :Stop   
      
    JS> Why would 1:342/200@fidonet is busy... The 200 address is the   
    JS> internet rex machine whereas 201 is the binkd machine...   
      
    JS> Is there a flag or semaphore that is active?   
      
   You sure it's not supposed to be 1:342/201.0?    
      
      
   --- NiKom v2.5.0dev   
    * Origin: Delta City (deltacity.se, Vallentuna, Sweden) (2:201/120.0)