TZUTC: -0400   
   MSGID: 365.fido-bbscarni@1:3634/12 23a92420   
   REPLY: 4:801/189.1 5f42e27c   
   PID: Synchronet 3.18a-Linux  May 23 2020 GCC 7.5.0   
   TID: SBBSecho 3.11-Linux r3.173 May 23 2020 GCC 7.5.0   
   CHRS: ASCII 1   
   NOTE: FSEditor.js v1.104   
     Re: Terminate and Error 200   
     By: Flavio Bessa to All on Sun Aug 23 2020 18:39:57   
      
      
    > Tried to use the TPPatch.exe and nothing... Should I decompress the .EXE   
   file, patch it and compress it again?   
      
   if the binary is compressed, of course you have to uncompress it first ;)   
      
   recompressing it is up to you for the most part... just be aware that some   
   software has built-in tamper-detection code so no matter what you do, you may   
   be screwed... only solution in many of those cases is to run a TSR like   
   moslow or similar which makes the CPU slower in that instance so the timing   
   calibration won't all take place within the same second leading to x-x=0 where   
   0 is used for the divide operation...   
      
      
   )\/(ark   
   --- SBBSecho 3.11-Linux   
    * Origin: SouthEast Star Mail HUB - SESTAR (1:3634/12)   
   SEEN-BY: 1/120 123 18/0 200 90/1 103/705 116/116 120/340 123/0 25   
   SEEN-BY: 123/40 50 115 130 150 170 180 755 129/215 135/300 153/7715   
   SEEN-BY: 154/10 30 40 50 700 203/0 221/0 6 226/30 227/114 229/101   
   SEEN-BY: 229/275 424 426 452 664 240/1120 2100 5138 5411 5832 5853   
   SEEN-BY: 249/206 317 400 261/38 280/464 5003 292/8125 299/6 300/4   
   SEEN-BY: 317/3 320/219 322/757 342/200 396/45 633/280 2452/250 2454/119   
   SEEN-BY: 3634/0 12 15 24 27 50 119   
   PATH: 3634/12 154/10 280/464 240/5832 229/426