REPLY: 1:229/426 6E6EB078   
   MSGID: 1:153/757 6095a9f7   
   CHRS: LATIN-1 2   
   TZUTC: -0700   
   TID: hpt/lnx 1.9.0-cur 2021-04-18   
   Hello Aaron,   
      
    AT> I'm trying to run bbbsd on Ubuntu with this syntax:   
      
    AT> sudo ./bbbsd 1 1 telnet:23 httpd:80   
      
    AT> But then BBBSD says this:   
      
    AT> "Can't bind to socket. Is service already running? Using ports below   
    AT> 1024 require root access, see uid: paramenter"   
      
    AT> It works fine if I just run it on port 23 for telnet like this:   
      
    AT> sudo ./bbbsd 1 1 telnet:23   
      
    AT> But of course I want to listen for http connections too.   
      
    AT> Any tips?   
      
   I always ran bbbsd like this..   
      
   sudo ./bbbsd 1 1 ftpd:21 telnetd:23 httpd:80 rawd:24554:binkp quiet fork   
   uid:alan   
      
   There are other parameters you can use too, use the uid: of the user the BBS   
   is running as. Adjust as needed.   
      
   It's been a while since I ran the SW version. I'm not sure how a command like   
   that will work in the SW version but have a try and see.   
      
   bbbsd is a listener. You can run bbbs to poll other nodes like this..   
      
   ./bbbs 1 1 tcpip   
      
   Or like this to log on locally..   
      
   ./bbbs 0   
      
    Ttyl :-),   
            Al   
   --- GoldED+/LNX 1.1.5-b20180707   
    * Origin: The Rusty MailBox - Penticton, BC Canada (1:153/757)   
   SEEN-BY: 1/123 30/0 90/1 105/81 120/340 123/131 129/305 153/105 135   
   SEEN-BY: 153/757 802 154/10 218/700 221/1 6 226/30 227/114 229/101   
   SEEN-BY: 229/424 426 452 550 664 700 1016 1017 240/1120 5832 249/206   
   SEEN-BY: 249/317 261/38 280/464 282/1038 292/854 301/0 1 101 113 317/3   
   SEEN-BY: 322/757 335/364 342/17 200 633/280 4500/1 5058/104   
   PATH: 153/757 221/6 301/1 229/426