REPLY: 2:222/2.0 c490070e   
   MSGID: 2:263/1.950 5e303125   
   TZUTC: 0000   
   CHRS: CP437   
    TM> Has anyone had any experiance setting up BBBS on a Raspberry Pi? I have a   
    TM> couple of Pi 4s to play with, but very little (if any) Linux experience,   
    TM> so this may be a complete wild shot.   
      
    TM> But if there is anyone out there which has some information on how to get   
    TM> started, may be one day my BBS will be back?   
      
   I used to have it set up under a Pi3 but switched to a fanless Linux box.   
      
   Just make sure the environment settings are set, I think you need to add the   
   user to the dialout group to use certain ports. Just at boot up use a cron   
   entry to start both the daemon and dialout. I tend to use bbbs 1 1 TCPIP and   
   ensure that the dialout and slow protocols are set   
      
   Others may be better than me at explaining   
      
   Sean   
   --- AfterShock/Android 1.6.7   
    * Origin: TCOB1 on the mobile (2:263/1.950)   
   SEEN-BY: 1/19 123 14/5 15/0 16/0 19/36 34/999 90/1 103/705 106/201   
   SEEN-BY: 116/18 120/331 123/130 131 140 128/2 153/757 7715 154/10   
   SEEN-BY: 203/0 124 218/700 221/0 1 222/2 227/114 229/426 452 1014   
   SEEN-BY: 230/0 150 152 240/1120 5832 249/206 317 250/1 261/38 100   
   SEEN-BY: 266/512 267/155 275/100 280/464 5003 282/1031 1056 291/1   
   SEEN-BY: 291/111 292/854 317/3 320/119 219 322/0 757 340/400 342/13   
   SEEN-BY: 342/200 396/45 423/120 640/1321 712/848 770/1 801/161 189   
   SEEN-BY: 2320/105 2452/250 3634/12 24 5020/1042   
   PATH: 263/1 222/2 261/38 320/219 203/0 280/464 229/426