Just a sample of the Echomail archive
Cooperative anarchy at its finest, still active today. Darkrealms is the Zone 1 Hub.
|    AUTOMOTIVE    |    Anything to do with cars    |    2,177 messages    |
[   << oldest   |   < older   |   list   |   newer >   |   newest >>   ]
|    Message 356 of 2,177    |
|    Roy Witt to Mark Hofmann    |
|    Air Compressors.    |
|    10 Sep 11 16:22:58    |
      10 Sep 11 11:39, Mark Hofmann wrote to Roy Witt:                             RW>> No, the wire is the same as used on 110v. I ran 100 feet of 3/12 to        RW>> drop 220v at my milling machine. It has a phase converter on it that        RW>> changes that 220v single phase to 3 phase. The phase converter        RW>> manufacturer confirmed to me that there would be plenty of voltage        RW>> at the end of that 100 feet. He was right. I have 219 to 232 volts.               MH> Maybe I am thinking about a higher amp line. I think my old hot tub        MH> needed to be on either a 30 or 50 amp breaker. I can't remember.        MH> The issue was, the 50 amp wire is more difficult to work with due to        MH> the gauge being thicker.              At 50amps, code requires 8/2 WG or 8/3 WG...About $100 per 50 feet. And       yes, 8 guage wire is very hard to work with. OTH, you could get by with       using 12/3 WG on 220v at 30amps and 50 feet would only cost you $30...               MH> I could tap into another circuit to the garage without too much        MH> trouble, but believe they are all 30 amp 110v. The dryer is on a        MH> higher one and 220v, but I wouldn't want to share that with the        MH> compressor.              I share those two appliances on the dryer's 220v line. Not a problem as       the dryer isn't using enough amps to stop the compressor from running at       the same time. I don't leave the compressor on unless I'm using it and the       wife knows not to start the dryer when the compressor is running.               MH> I also have a fridge in the garage, so I will already be pushing that        MH> one feed. If it is possible to tap into the existing 110v outlet that        MH> the fridge is on in the garage and make another outlet that is 220v,        MH> that would work. I didn't think something like that was possible.              You would have to go back to the breaker box and make sure that the two       110v hot lines you use for 220v are from opposite sides of the box with a       return to the ground buss.                      R\%/itt                      ... Only 5% of all humans have the privilege to live in America.              --- Twit(t) Filter v2.1 (C) 2000-10        * Origin: SATX Alamo Area Net * South * Texas, USA * (1:387/22)    |
[   << oldest   |   < older   |   list   |   newer >   |   newest >>   ]
(c) 1994, bbs@darkrealms.ca