RW> ml> it almost sounds to me like there's additional rubbing inside,   
   RW> ml> somewhere, which may be wearing the internal jacket causing sharp   
   RW> ml> edges which could be   
   RW> ml>  catching the cable... could it be that the new cables have been   
   RW> ml> routed incorrectly which may be adding an additional or more bend   
   RW> ml> than the original had?   
      
   RW>Maybe. But I think it would be more along the lines of no lubrication. The   
   RW>cable manufacturer probably included an instruction sheet with the cable   
   RW>that told the installer to lube the cable before installation and he   
   RW>didn't read the instructions. Which is par for the course in many shops.   
      
   HEY, Put a Mark on the Wall.   
   Typo Tom got one Right perhaps!!  :-)  :-)   
   ---   
    þ SLMR 2.1a þ 0     
    * Origin: TECHWARE BBS -  Since 1995  -  www.techware.dynip.com  (1:102/401)