TZUTC: -0700   
   MSGID: 743.automoti@1:218/700 24000254   
   REPLY: 742.automoti@1:218/700 23fff8ef   
   PID: Synchronet 3.18c-Win32  Sep 30 2020 MSC 1927   
   TID: SBBSecho 3.11-Win32 r3.179 Sep 30 2020 MSC 1927   
   CHRS: ASCII 1   
   -=> Kurt Weiske wrote to All <=-   
      
    KW> The driver's side window started making an awful noise and shaking   
    KW> when rolling down, found a YouTube video documenting the likely   
    KW> problem, teeth shearing off of a $7 nylon gear. I took the motor out   
    KW> and spotted the exact same issue, the new gear is arriving tomorrow.   
      
    Postscript: I'd put the old motor/gear back, minus the debris, and it   
    worked OK, with a little "tick" when it slipped against the missing   
    teeth instead of horrid grinding when the debris jammed between the   
    gears.   
      
    I should have quit while I was ahead.   
      
    I went to install the new motor, and the bracket on the inside of the   
    door that the motor installs to cracked and fell inside the door.   
      
    I punted and took it to my repair shop, who got a replacement part   
    and installed my new motor for $280.   
      
      
      
   ... Abandon desire   
   --- MultiMail/XT v0.52   
    * Origin: http://realitycheckbbs.org | tomorrow's retro tech (1:218/700)   
   SEEN-BY: 1/123 90/1 120/340 123/131 226/30 227/114 702 229/101 424   
   SEEN-BY: 229/426 664 1016 240/5832 249/206 317 400 292/854 317/3 322/757   
   SEEN-BY: 342/200 633/280   
   PATH: 218/700 261/38 320/219 221/1 280/464 229/101 426