Hi Paul.   
      
   21 Jan 18 08:22:26, you wrote to me:   
      
    TK>> Or two argus clones were smart enough to handshake the best common   
    TK>> protocol? I haven't used Argus/Radius/Taurus so much in the past so I   
    TK>> wouldn't know.   
      
    PQ> My node connects with Scott Little's Argus system many, many times a day   
    PQ> but always on the binkP port, though there were some recent telnet   
   connects   
    PQ> as I think Scott was experimenting.  I don't know much either.   
      
   Radius-to-Radius connection to your ifc port 60179:   
      
   === Cut ===   
    21-Jan-2018 09:04:37 Begin v4.011/24.10.2013,17:38(Bzdeta)   
    21-Jan-2018 09:04:37 Running under: Windows NT 6.1 (build: 7601, Service   
    21-Jan-2018 09:04:37 Connect To 122.148.59.26 #60179   
    21-Jan-2018 09:04:38 EMSI data send   
    21-Jan-2018 09:04:38 Nothing for them   
    21-Jan-2018 09:04:38 Establishing BinkP transfer protocol   
    21-Jan-2018 09:04:38      M_NUL : OPT CRAM-MD5-8c284e1919785dfa92264523a8a   
    21-Jan-2018 09:04:38      M_NUL : OPT PLZ   
    21-Jan-2018 09:04:38 Switching to packet compression mode   
    21-Jan-2018 09:04:39    Station : Quinn's Post   
    21-Jan-2018 09:04:39    Address : 3:640/384 3:640/1010   
    21-Jan-2018 09:04:39      SysOp : Paul Quinn from Maryborough, QLD, OZ   
    21-Jan-2018 09:04:39     Number : quinnspost.nodelist.net   
    21-Jan-2018 09:04:39      Flags : XW,CM,IBN,IEM:eskimo261@bigfoot.com,PING   
    21-Jan-2018 09:04:39     Mailer : Radius/4.010/21.01.2005,13:56(Final-Rele   
    21-Jan-2018 09:04:39       Time : Sun, 21 Jan 2018 17:04:36 +1000   
    21-Jan-2018 09:04:39 Non-password session   
    21-Jan-2018 09:04:39 Dbg: Blank M_OK message   
    21-Jan-2018 09:04:39 Handshake time - 1 seconds   
    21-Jan-2018 09:04:39 SEND: End of batch   
    21-Jan-2018 09:04:40 RECE: End of batch   
    21-Jan-2018 09:04:41 Session completed successfully   
    21-Jan-2018 09:04:41 End   
   === Cut ===   
      
   Binkp. :)   
      
   But the connection to your telnet port was EMSI/Hydra:   
      
   === Cut ===   
    21-Jan-2018 09:11:41 Begin v4.011/24.10.2013,17:38(Bzdeta)   
    21-Jan-2018 09:11:41 Running under: Windows NT 6.1 (build: 7601, Service Pack   
    21-Jan-2018 09:11:41 Connect To 122.148.59.26 #10023   
    21-Jan-2018 09:11:42 EMSI data send   
    21-Jan-2018 09:11:42 Nothing for them   
    21-Jan-2018 09:11:43 EMSI data receive   
    21-Jan-2018 09:11:43    Station : Quinn's Post   
    21-Jan-2018 09:11:43    Address : 3:640/384 3:640/1010   
    21-Jan-2018 09:11:43      SysOp : Paul Quinn from Maryborough, QLD, OZ   
    21-Jan-2018 09:11:43     Number : quinnspost.nodelist.net   
    21-Jan-2018 09:11:43      Flags : 28800,XW,CM,IBN,IEM:eskimo261@bigfoot.com,P   
    21-Jan-2018 09:11:43     Mailer : Radius/4.010/21.01.2005,13:56(Final-Release   
    21-Jan-2018 09:11:43 EMSI Addon : XDATETIME [Sun, 21 Jan 2018 17:11:41 +1000]   
    21-Jan-2018 09:11:43       Time : 21-Jan-2018 17:11:41   
    21-Jan-2018 09:11:43 Non-password session   
    21-Jan-2018 09:11:43 Handshake time - 2 seconds   
    21-Jan-2018 09:11:43 Establishing Hydra transfer protocol   
    21-Jan-2018 09:11:44 Hyd: Remote AppInfo ="Radius,4.010/21.01.2005,13:56(Fina   
    21-Jan-2018 09:11:44 Hyd: Remote HydraRev=05-Oct-2003, flags: ASC,UUE,C32,PLZ   
    21-Jan-2018 09:11:44 Remote supports multiple batches   
    21-Jan-2018 09:11:44 Switching to packet compression mode   
    21-Jan-2018 09:11:44 SEND: End of batch   
    21-Jan-2018 09:11:44 RECE: End of batch   
    21-Jan-2018 09:11:45 Hydra transfer protocol complete   
    21-Jan-2018 09:11:46 SEND: End of batch   
    21-Jan-2018 09:11:47 RECE: End of batch   
    21-Jan-2018 09:11:47 Hydra transfer protocol complete   
    21-Jan-2018 09:11:48 Session completed successfully   
    21-Jan-2018 09:11:48 End   
   === Cut ===   
      
   'Tommi   
      
   ---   
    * Origin: *** nntp://fidonews.mine.nu *** Finland *** (2:221/6)