mark lewis    
      
      
    ml>  On Mon, 01 Dec 2014, Ian Segers wrote to mark lewis:   
      
    IS>   I unticked the 5d outbound in Taurus path config, didn't make   
    IS> much differnce unless there is same were else I was meant to do   
    IS> it.   
      
    ml> no, that's the one place...   
      
       
       Okay cool.       
      
      
    ml> what is your outbound directory definition in ?   
      
    IS>          in sbbsecho.cfg is d:\bbs\fd\outbound\   
      
    ml> what is your outbound direcrory definition in argus/radius/taurus?   
      
    IS>     in rgus/radius/taurus its D:\bbs\fd\outbound   
      
    ml> those two look ok... Zone 3 is your default outbound so your outbound   
    ml> directories would match like this...   
      
    ml>  D:\bbs\fd\outbound        Z3   
    ml>  D:\bbs\fd\outbound.001    Z1   
    ml>  D:\bbs\fd\outbound.002    Z2   
    ml>  D:\bbs\fd\outbound.004    Z4   
    ml>  D:\bbs\fd\outbound.028    Z40   
      
    ml> the plain "outbound" or "out" or whatever you want to name it is always   
    ml> your default zone... your default zone is taken from your first FTN   
    ml> address... the other directories are given an extension, in hex, of the   
    ml> other zones...   
      
      
   these directories, do I have to create them myself or does taurus   
   creates them itself.   
      
      
      
      
    IS> netmail in taurus outbound  via *.msg the *.msg there but @   
    IS> 3:770/330@fidonet which is my address if the netmail is in pkt   
    IS> form in dir of out in taurus outboound its @ 3:770/330@fidonet   
    IS> with no pkt attached   
      
    ml> this is hard to understand... PKT names are 8.3 format... are you   
    ml> trying to use taurus' dynamic netmail packing capability? taurus and   
    ml> sbbsecho should not know of the other's MSG directory... sbbsecho   
    ml> handles its MSG directory all on its own and in its own special way...   
    ml> it is much different than what other mailers would expect...   
      
      
      
      
    IS>     Should I have the dynamic netmail packing capability unticked   
    IS> in taurus netmail preference.   
      
    ml> yes, you need to operate taurus in pure BSO/FLO mode... in sbbs'   
    ml> echocfg program, what mailer type do you have selected? this should be   
    ml> binkley/FLO...   
      
    Yes it is set on binkley/FLO   
      
    ml>taurus should not be looking in any special directory   
    ml> for netmail... sbbsecho has to do your netmail packing and routing...   
    ml> with that said, what does your sbbsecho.cfg contain for its DIRECT and   
    ml> ROUTE_TO lines?   
      
      
   Direct is yes   
   ROUTE_TO is set to my provider 1:340/400   
      
      
   Netmail format is *.msg and front door I use to post a netmail message   
      
   Thank you   
   Ian   
      
      
    ml> )\/(ark   
      
      
    ml> * Origin:  (1:3634/12)   
      
   ... http://www.1stchoicecore.co.nz...drop in same time   
   --- MultiMail/Win32 v0.49   
   --- SBBSecho 2.12-Win32   
    * Origin:  (3:770/330)