Hi Benny;   
   On 11/12/2004 5:15 PM, BENNY PEDERSEN wrote to DENNIS SMITH:   
      
   -> Hello DENNIS!   
   ->    
   ->  ->> how does Envoy 3.x runs on os4 and A1 ?   
      
   [ Don't know how to hookup to the A1200...]   
      
   -> if you like to run both envoy and tcp on the same nic i have to find my   
   config   
   -> for envoy, it works, but i have lost what i did :=) [1]   
      
   Gack! =:o   
   ->    
   -> could be that A1 is delivered with debian at the start would make some port   
   -> envoy to linux so it would be easy to transfer old drives to A1 hardware :=)   
      
   Yes, I recentlly upgraded the Debian linux kernel to 2.4.26. I'm kind of   
   waiting for issues to be resolved with Sarge.    
   ->    
   -> is it a problem ?   
      
   My current OS4 inet setup:  Roadshow->LinkSys router->cable modem->ISP.   
   Can I hub in the A1200? I think I need a PCMCIA card for 1200 to do the link   
   to the A1 via HUB switch. Yes/No ? I don't know the physical connections. I   
   haven't figured out a compatible card for the 1200.   
   ->    
   -> [1] http://www.nordicglobal.com/ search for sanna ii faq ip arp types amiga   
   dsl   
   -> faq q4 d :)   
   -> [2] thats all to make envoy work with miami and dx   
      
   OK, I'll check this out!   
      
   Dennis   
       
   --- Platinum Xpress/Win/WINServer v3.0pr5   
    * Origin: Eastpointe BBS (1:120/228)