Hello David,   
      
     DLS> Look for scandoublers or PicassoII or PicassoIV   
        > boards.   
      
   I was thinking more of small (probably passive) adaptors. They may just route   
   the appropriate pins from the Amiga's video connector to a VGA one, but   
   perhaps there are resistors to drop the video signal voltages to VGA levels.   
      
   On an ECS Amiga that would let me run 'productivity mode', although a   
   scan-doubler would be nice to let me see NTSC & PAL screens too.   
      
   I have a friend that went through one or two Picasso boards. I was impressed   
   with his, but my only Zorro-equipped Amiga is in Britain.   
      
     DLS> ...but try Centsible Software (1-800-640-6211 or   
        > http://www.centsible.com), Mr. Hardware (631-821-2364   
        > or http://www.mrhardwarecomputers.com) or Software   
        > Hut (610-701-6301 or http://www.softhut.com).   
      
   Thanks for the pointers!   
      
     DLS> Also, try Fido AmigaSale. It could use some traffic.   
      
   I'm not sure whether the BBS I use carries that one.  It's tricky to figure   
   out which conference maps to which echo because of the way they're labelled.   
      
     DLS> Springfield, IL USA   
      
   It's good to know that I'm not the only Amiga user in Illinois :-)   
      
   - Andy Ball.   
      
   --- BBBS/NT v4.01 Flag-4   
    # Origin: FamilyNet Sponsored by http://www.christian-wellness.net (8:8/2)   
    * Origin: BBS Networks @ www.bbsnets.com 808-839-5016 (1:10/345)