06-24-14 11:16 Roy Witt wrote to Ed Vance about Storage   
      
    RW> @MSGID: <53A9F73D.623.amtradio@capcity2.synchro.net>   
    RW> Greetings Ed!   
   Howdy! Roy,   
   -snip-   
    HG>> GM Ed,   
      
    EV> GM Holger ... ._ __ ,   
      
    EV>> __. ._. .. _.   
      
    EV>   is easier written and read, hi.   
      
    RW> --. is easier to read than __. = don't have to use the shift   
    RW> key either.   
      
    RW> Note the small space between the -- vs the non existant space   
    RW> here __.   
      
    RW> .... .- ...- .  .-  -.. .- -.--  -.-.--   
      
   I prefer using the Shifted Underscore Key because to me, using the   
   Hyphen Key makes the Morse Characters looks like they are being sent   
   with a Frequency-Shift Keyer for CW instead of turning the Oscillator   
   On and Off with a Telegraph Key.   
      
   . = Low Tone   
      
   - = High Tone   
      
   I still would prefer using the J-38 Key with the Plastic Base reversed   
   on the Key by removing the Two Screws, reversing the Base and   
   re-fastening the Two Screws.   
      
   I have a Vibroplex Bug too but found out I send better CW with the J-38   
   Key.   
      
   NNNN   
      
   ... I just figured out PI to the seventy-fifth decimal place.                    
      
   --- MultiMail/MS-DOS v0.49   
   --- SBBSecho 2.12-Linux   
    * Origin: telnet & http://cco.ath.cx - Dial-Up: 502-875-8938 (1:2320/105.1)