Greetings TOM!   
      
    TW> Sionce there is still some confusion about what Roy and I were   
    TW> discussing on the subject I decided to post a reference showing that   
    TW> we are BOTH right. The LPDA I was refering to is a pure edition of   
    TW> the Basic Theory while Roys version is modified to make it easier to   
    TW> construct. The origional implementation had to have ALL the   
    TW> "Elements" insulated from the support boom and wiring used to   
    TW> alteanate the left and right conections as in figure 1 in my   
    TW> reference web page. In the later design it uses two support booms and   
    TW> the left and right elements alternate which boom they are connected   
    TW> to baciclly eliminating the additional wiring as in Figure 4 and 5 in   
    TW> the reference. The end result is the same and I was NOT talking about   
    TW> a Standard Yagi   
      
    TW> http://tinyurl.com/k3pbqve   
      
   The same page I was using as a reference...   
      
    TW> to make Roy Smile again!  :-)  :-)   
    TW> ---   
    TW>  þ SLMR 2.1a þ 0   
    TW>  * Origin: Fidonet Since 1991 bbs.docsnetservices.com (1:123/140)   
      
       Have a day!   
      
            R\%/itt - K5RXT   
      
   --- GoldED+/W32 1.1.5-31012   
   --- D'Bridge 3.99   
    * Origin: HAM Radio, aka Amateur Radio. 804? Over! (1:387/22)