==============================================
README Notes: VirusBuster for Windows v4.85.00
==============================================

To make this document easier to read, you can enlarge the window
to its maximum size. To do so, click the Maximize button in the
upper-right corner of the window. Or open the Control menu in the
upper-left corner of the window (press ALT+SPACEBAR), and then
choose the Maximize command.

To move through the document, press the PAGE UP or PAGE DOWN keys.
Or click the arrows at the top and bottom of the scroll bar along
the right side of the window.

To print the document, choose Print from the File menu.


1. Installation
===============

To install the software run SETUP.EXE on the distribution disk
(File menu, Run; from Program Manager or File Manager). Simply
follow the instructions given by Setup to install the software.

NOTE: If Windows is already using a file and we're updating it,
Setup will ask to restart Windows (other applications will be
given their chance to shut down normally).

If we're installing a file that requires a reboot of the system
to activate it, Setup will ask to reboot (other applications
will be given their chance to shut down normally).


2. Removing Virus Buster
========================

To remove the software:

a.	Remove any references to VBTSR from c:\config.sys and/or
	c:\autoexec.bat.

b.	Remove any references to "device=[path]\VBPOPUP.386" from the
	[386Enh] section of system.ini (in the Windows directory).

c.	If VirusBuster was installed under Windows 95 delete the
	BUSTER.VXD file from the \WINDOWS\SYSTEM\IOSUBSYS directory.

d.	Remove any references to "leponcew.exe" from the "load=" line
	in the [windows] section of win.ini (in the Windows directory).

e.	Delete all the files in the installation directory


3. Program Failure
==================

If any executable dies for any reason, please note whether the
fault is repeatable, and the sequence used to obtain it. If the
infamous UAE box appears, note the program, module name and the
fault address before contacting our Technical Support team.


4. Notes for Network Administrators
===================================

Node Install for Windows (WinNodi) is now distrubuted in a self-
extracting archive named WN.EXE. This file will not be copied by
Setup. Copy WN.EXE to a temporary directory on the distribution
server and run it there. This will extract out the files used by
WinNodi. Please consult the WinNodi.txt file for the latest
information. Documentation is also available in the WinNodi.hlp
file.

The latest version of Node Install for Windows can be obtained
at the following URL:

  http://www.leprechaun.com.au/winnodi/


5. Contacting Leprechaun Software
=================================

If you have any problems, queries or suggestions regarding this
product please contact us:

Leprechaun Software Pty Ltd
75 Redland Bay Road
PO Box 826
Capalaba  Queensland  4157
Australia

Phone:     +61 (7) 3823 1300
Fax:       +61 (7) 3823 1233
BBS:       +61 (7) 3823 1228
           +61 (7) 3823 1229

E-mail:    tech@leprechaun.com.au

Internet:  http://www.leprechaun.com.au/

