Ref: 99980135
Title: P1MMON PROMs Revision 01A on the ILANA/AT-XT Board
Date: 6/17/87

Copyright 3Com Corporation, 1991.  All rights reserved.

Enclosed is a set of P1MMON PROMs Revision 01A for the ILANA/AT-
XT board.  This set consists of one Revision 01A PROM for bit 0
to bit 7 and one Revision 01A PROM for bit 8 to bit F.

.h1;Installation Instructions

Follow these steps to install the P1MMON PROMs Revision 01A on
the ILANA/AT-XT board:

1.  If the rows of pins are too far apart to fit into the
sockets, press them closer together by pushing the side of the
PROM against a flat surface.

2.  Gently push the PROM marked 0-7 into the socket marked 0-7 on
the ILANA/AT-XT board.  Be sure that the notch in the PROM is
oriented in the same direction as the currently installed set.

3.  Gently push the PROM marked 8-F on into the socket marked 8-F
on the ILANA/AT-XT board.  To avoid being invoiced for the new
PROMs, return the old set to Bridge Communications with 30 days.

.h1;New Features

The following features, which were not present in P1MMON Revision
00F, have been implemented in P1MMON Revision 01A:

1.  It supports the ILANA/XT board.

2.  It allows for fast boot in a warm boot situation.

3.  It supports a 64 kilobyte window on the ILANA/AT.

If you have any questions, please contact an authorized 3Com
service representative for assistance.


