Ref: 99970019
Title: CIOSYS Release Note Number 5798-00
Date: 03-21-88

Copyright 3Com Corporation, 1991.  All rights reserved.

Part Number 5798-00
3/21/88

CAUTION!

Disk Partition Sizes on 3S/200 and 3S/400 Series Servers
On 3S/200 and 3S/400 disks that have been reformatted to use partition
sizes other than the defaults shipped by 3Com, there is a possibility
of data corruption and data loss.  While this temporary situation
exists,use only the following disk partition sizes with default sector
and cluster sizes on server hard disks:

.LT
Drive ID    3S/200   3S/400
    C:      20MB    27MB
    D:      32MB    32MB
    E:      32MB    32MB
    F:      20MB    32MB
    G:      N/A     32MB
.EL

These are the partition sizes set at the factory.

OR

.LT
Drive ID    3S/200   3S/400
    C:      32MB    32MB
    D:      32MB    32MB
    E:      32MB    32MB
    F:      8MB     32MB
    G:      N/A     27MB
.EL

These are the default partition sizes set by 3DISK and 3DISK386 when
you reformat the disk.

For more information on disk formats, including default sector and
cluster sizes, see your server guide.

Federal Communications Commission Notice
For 3S/400 Federal Communications Commission information, refer to the
notice below, rather than the one in the 3Server386 Guide :

This equipment generates, uses, and can radiate radio frequency energy
and if not installed and used in accordance with the instructions
manual, may cause interference to radio communications.  It has been
tested and found to comply with the limits for a Class A computing
device pursuant to Subpart J of Part 15 of FCC Rules, which are
designed to provide reasonable protection against such interference
when operated in a commercial environment.  Operation of this
equipment in a residential area is likely to cause interference in
which case the user at his own expense will be required to take
whatever measures may be required to correct the interference.

Part Number 5798-00
3/21/88
