Ref: 99960016
Title: 3+Error Messages Appendix A
Date: 07-05-89

Copyright 3Com Corporation, 1991.  All rights reserved.


.BR;Error Messages
.BR;A-1
.BR;7/5/89

.BR;Appendix A:  Error Messages
.BR;Error messages code numbers correspond to the error categories listed
in this appendix.  When an error code is displayed on your screen,
cross reference it to the text explanation in this appendix.  Look up
the text message in one of the guides listed below.  You will need to
refer to the following guides for complete information and recovery
action for these error codes:

NetBIOS Programmer's Reference Guide for 40XX error codes.

3+ Messages Guide  for 3+Name service 10XXX error codes.

3+ Messages Guide  for 3+Share 138XX error codes.

MS DOS Technical Reference Manual  version 3.01 or greater for MS-DOS
18XXX error codes.

The following error messages are specific to 3+Share version 1.4a and
are not documented in the guides listed above.

Access denied.

Meaning: A sharename profile does not exist for the user.

Action: Create a sharename profile for the user, even if you do not put
anything in it.
---
Bad password.

Meaning: The system password for a sharename is not equivalent to PASS1
parameter in the user's sharename profile.

Action: Change the PASS1 parameter for a sharename in the user's
sharename profile to be equivalent to the system password for the
sharename.
---
Incorrect password.

Meaning: The user is either entering an incorrect password for the
sharename or the user name does not exist in the Name service.

Action: Give the user the correct password or add the user to the Name
service.


---
Login:error - User has no login profile!

Meaning: The user does not have a login profile.

Action: Create a login profile for the user.
---
Problem initializing access control module.

Meaning: Not enough processes.

Action: Adjust the device=Pro.sys line in your CONFIG.SYS file.  Syntax
is: Device=Pro.sys A B C.  A represents the total number of processes.
Increase "A" by an increment of five.
---
Problem initializing heartbeat listener module.

Meaning: Not enough memory.

Action: Adjust the device=Pro.sys line in your CONFIG.SYS file.  Syntax
is: Device=Pro.sys A B C.  A represents the total number of processes.
Increase "A" by an increment of five.
---
3Share access process:  IDP New client failed.

Meaning: Not enough memory.

Action: Adjust the device=Pro.sys line in your CONFIG.SYS file.  Syntax
is: Device=Pro.sys A B C.  A represents the total number of processes.
Increase "A" by an increment of five.
---
Share server access mgr not responding

Meaning: The client machine, most likely a LinkPlus Optimizer, does not
have enough Ethernet buffers to run this application.

Action: Increase the Ethernet buffers (eth -b) on the netstation.
---
.BR;NETIOS Error Codes
.BR;These are the numerical equivalents of the NetBIOS error codes.  Next
to the number is a text explanation.  Use the NetBIOS Programmer's
Reference Guide to find the meaning and suggested corrective measure.

4096 Command accepted/completed

4097 Illegal buffer length

4099 Invalid command code

4101 Command timed-out

4102 Message incomplete

4104 Illegal local session number

4105 No resource available

4106 Session Closed

4107 Command cancelled

4109 Duplicate in local name table

4110 Name table full

4111 Name de-registered, but active

4113 Local session table full

4114 Session open rejected

4115 Illegal name number

4116 Cannot find name/no answer

4117 Name not found, no (value found in NCB_CMD_CPLT field - valid
only for no-wait options) or (00H Command accepted/completed)

4118 Name in user on remote adapter

4119 Name deleted

4120 Session ended abnormally

4121 Name conflict detected

4122 Incompatible remote device

4129 Interface busy

4130 Too many commands outstanding

4131 Invalid number in NCB_LANA_NUM

4132 Command was not cancelled

4233 Reserved name specified

4134 Command not valid to cancel

4136 Locator not responding

.BR;Name Service Error Codes
.BR;These are the numerical equivalents of the 3+ Name service error
codes.  Next to the number is a text explanation.  Use the 3+ Messages
Guide to find the meaning and suggested corrective measure.

10241 Operating System

10242 No such organization

10243 No such domain

10244 Object does not exist

10245 Domain of object is foreign: long net

10246 Name alias, object not exist: CH_NAME alias_obj

10247 Name alias, domain of object is foreign: long net, CH_NAME
alias_obj

10248 Name alias, domain or org not exist: CH_NAME alias_obj

10249 Name alias, object alias: CH_NAME alias_obj

10250 Data base bad

10251 Name index bad

10252 Property index bad

10253 Object already exists

10254 Not enough space for object

10255 Object not alias

10256 Property does not exist

10257 Property not defined

10258 Property item not property

10259 Property not group property

10260 Property value invalid

10261 Primary property already exists (and trying to add primary)

10262 Primary property does not exist (and trying to add property)

10263 Object already has property (on add)

10264 Object already has max number of properties

10265 Object does not have property

10266 Object does not have enough space for property

10267 Property create (modify) and type is different

10268 Illegal property definition

10269 Property in use (on remove)

10270 Property is special

10271 Already have max number of properties

10272 Not enough space to create property

10273 Item is already a member (on add)

10274 Not enough space for member

10275 Item is not a member

10276 Invalid credentials

10277 Invalid verifier

10278 Does not have capability

10279 Inappropriate credentials

10280 Domain already exists (on create)

10281 Max number of domains already exist

10282 Invalid domain type

10283 Not enough resources (on create)

10284 Domain does not exist (on remove)

10285 Illegal org name

10286 Illegal dom name

10287 Illegal obj name

10288 CH too busy for request

10289 Must use courier

10290 Some other type of error

10291 Reject call

10292 Block not data block

10293 Words not is block

10294 Total maximum reached

10295 Object count will exceed max count

10296 Count too large

10297 Source index greater than dest

10298 Source index less than dest

10299 Domain ID not valid

10300 Domain version number not valid

10301 Domain free space ptr not valid

10302 Domain header block and/or size invalid

10303 Domain has duplicate name definition

10304 Domain has invalid status

10305 Domain has modified flag on

.BR;3+Share Error Codes
.BR;These error messages are generated by 3+File, 3+Print, and 3+Name, the
services in 3+Share.

13825 Bad value for type

13826 End of list

13827 Bad user name pattern

13828 Bad session id

13829 Bad network address

13830 Not server

13831 Bad drive number

13832 Max users on server

13833 Not enough space on server

13834 User already exists

13835 Home dir already exists

13836 Bad user name

13837 Bad home dir name

13838 User does not exist

13839 User had resources

13840 Home dir not empty

13841 User has session in progress

13842 Bad object access type

13843 Bad name type

13844 Shortname already in use

13845 Bad path name

13846 Bad printer name

13847 Bad password

13848 User does not have share access

13849 Path (or printer) already shared

13850 User not owner

13851 Shortname not found

13852 Object in use

13853 Object is a home directory

13854 Bad object name pattern

13855 Printer name not found

13856 User not on server

13857 Bad value

13858 Bad queue entry id

13859 Bad form type

13860 Internal server error

13861 Bad object name

13862 File is in intercept (file being spooled)

13863 Queue is empty

13864 Max shares already done on server


.BR;DOS Error Codes
.BR;These are the numerical equivalents of the MS-DOS error codes.  Next
to the number is a text explanation.  Use the MS-DOS Technical
Reference Manual to find the meaning and suggested corrective measure.

18433 Invalid function number

18434 File not found

18435 Path not found

18436 Too many files open (no handles left)

18437 Access denied

18438 Invalid handle

18439 Memory control blocks destroyed

18440 Insufficient memory

18441 Invalid memory block address

18442 Invalid environment

18443 Invalid format

18444 Invalid access code

18445 Invalid data

18446 Reserved

18447 Invalid drive was specified

18448 Attempt to remove the current directory

18449 Not same device

18450 No more files

18451 Attempt to write on write-protected diskette

18452 Unknown unit

18453 Drive not ready

18454 Unknown command

18455 Data error (CRC)

18456 Bad request structure length

18457 Seek error

18458 Unknown media type

18459 Sector not found

18460 Printer out of paper

18461 Write fault

18462 Read fault

18463 General failure

18464 Sharing violation

18465 Lock violation

18466 Invalid disk change

18467 FCB unavailable

18468 Sharing buffer overflow

18482 Network request not supported

18483 Remote computer not listening

18484 Duplicate name on network

18485 Network name not found

18486 Network busy

18487 Network device no longer exists

18488 Net BIOS command limit exceeded

18489 Network adapter hardware error

18490 Incorrect response from network

18491 Unexpected network error

18492 Incompatible remote adapter

18493 Print queue full

18494 Not enough space for print file

18495 Print file was deleted

18496 Network name was deleted

18497 Access denied

18498 Network device type incorrect

18499 Network name not found

18500 Network name limit exceeded

18501 Net BIOS session limit exceeded

18502 Temporarily paused

18503 Network request not accepted

18504 Print or disk redirection is paused

18512 File exists

18513 Reserved

18514 Cannot make directory entry

18515 Fail on INT 24

18516 Too many redirections

18517 Duplicate redirection

18518 Invalid password

18519 Invalid parameter

18520 Network device fault
