Ref: 19140007
Title: Internetting to Multiple Networks
date: 6/8/90

Copyright 3Com Corporation, 1991.  All rights reserved.

Before you can NET USE to a remote server, you must add your Redirector
name to the remote network's Locator and add the remote server's name and
network number to your local 3NB table.  This is done with the REMSERV
command from your DOS or OS/2 workstation.

Unfortunately, if you need to NET USE to several remote servers
simultaneously, you may run into a limitation of the local 3NB table.
REMSERVing to the first network works fine, but when you try to REMSERV
to the second network you will get a "Name already set" message.  At
this point you are not able to NET USE to the second remote server.

The workaround to this problem is as follows:

1.  REMSERV to the first remote server.

2.  NET USE to the first remote server.

3.  Do a "3NB CLEAR *" or "3NB2 CLEAR *" command.  This will clear
your local 3NB table without breaking the link established in step 2.

4.  REMSERV to the second remote server.

5.  NET USE to the second remote server.
