Ref: 16560002
Title: CIOSYS Error 13 Upon Reinstallation
DATE: 8/1/89

Copyright 3Com Corporation, 1991.  All rights reserved.

After reinstalling 3+ version 1.3.1 software on your 3Server3 or
3Server386, then resetting the server, you may get the following
error message on the server's LCD:

                        CIOSYS ERROR 0013

Then the server locks up.

The error message indicates a "buffer pool conflict," probably
caused by the administrator's not saving the parameters of the
CIOSYS configuration after the reinstallation.  (Chapter 12 of
the Installation and Setup Guide, "Reinstalling 3+ on a 3Server3
or 3Server386," does not specify this step.)

After reinstalling the 3+ software, save the CIOSYS configuration
by following these steps:

1.  Run the 3OPT program.

2.  Highlight the CIOSYS from the main menu and select it by
    typing "C".

3.  Select each sub-menu parameter and save each of them by
    typing "CTRL-A".

4.  Save the CIOSYS configuration value by typing "CTRL-A", then
    select "S(ave)" option from the main menu, and "Q(uit)" the
    3OPT program.

5.  Reset the server with the proper settings of the control
    switches.
