Ref: 13260002
Title: Configuring AST 4-Port Boards
Date: 4/26/91

Copyright 3Com Corporation, 1991.  All rights reserved.

In the 3+Open Internet Administrator Guide, pages D-18 and D-19, the
labeling of the pictures showing installation of the AST 4-Port Board
is partially incorrect.

To correctly install the AST 4-Port Board, follow the pictures, not the
words.  The following guidelines will set the board to share interrupt 5:

  *  If you have one board, set the switches as pictured in Fig. D-2 on
page D-18.  In the CONFIG.SYS file, add the line "device = com01x /I:5"

  *  If you have two boards, set the switches for the first board as shown
in Fig. D-3 on page D-19 and the second board as shown in Fig. D-4 on page
D-19.  In the CONFIG.SYS file, add the line "device = com01x /I:5,5"

