Ref: 11640065
Title: Correct Versions of Drivers for Tape Drives
Date: 4/9/90

Copyright 3Com Corporation, 1991.  All rights reserved.

TAPE.SYS is for 3Server386 and 3Server/500 servers.  Use the
9/08/88 version.  It supports the Archive and Tandberg tape drives.

Diskettes required:
3Server386 System Software #1   version 1.3.1   3382-05
3+Backup #2                     version 1.3.2   4560-02


TDRIVE.SYS is for 3Server3s and 3Servers.  Use the 10/30/88 version of
TDRIVE.SYS.  It supports the Archive, Tandberg, and Wangtek tape drives.

Diskette required:
3Server System Software #1      version 1.3.1   2093-08 or later


If you do not have the correct version of TAPE.SYS or TDRIVE.SYS,
download it from the Ask3Com Forum, Drivers/Diagnostics library.


3Server External Tape Units

If the serial number of your external tape unit is less than 1,000, use
TDRIVE.SYS 1.1 or 1.2, dated 10/10/86, in your CONFIG.SYS file.  This
version is needed to support the ADSI controller.  Later version of
TDRIVE.SYS do not work well with the older external tape units.

If you upgrade to 3+ 1.2.1, also upgrade to 1.2.2 system software,
3+Backup 1.3.1, and TDRIVE.SYS 1.2.  (If you upgrade, keep the original
device driver.  The original driver should always work with the old
hardware.)

