Ref: 11640015
Title: No Video on 3Station
Date: 8/15/88

Copyright 3Com Corporation, 1991.  All rights reserved.

Q:  My 3Station doesn't show video!

A:  All 3Stations are shipped from the factory set for an enhanced
graphics adapter (EGA) monitor.  If you are using a monochrome or
color monitor the 3Station will not be set correctly and you won't
see a video display. Even if you are using an EGA monitor, you may
not get a video display because the 3Station has been set
previously for a color or monochrome monitor.

Though you cannot see the setup menu, there is a way to set the
3Station to work with your monitor. Turn the monitor on, wait a
few minutes for the 3Station to calculate available memory, then
do a CTRL-ALT-SHIFT-DEL to get to the setup menu.  You should hear
a beep when the setup menu has been loaded.  Then, depending on
the type of monitor you have, enter one of the following key
combinations:  CTRL-M for a monochrome monitor, CTRL-C for a color
monitor, or CTRL-E for an EGA monitor.

If this procedure doesn't work, the 3Station may actually need
repair.
