Ref: 11640002
Title: How to Restore Data Archived from EtherSeries to 3Plus
Date: 8/15/88

Copyright 3Com Corporation, 1991.  All rights reserved.

You will need a server upon which to install EtherSeries that you
can connect to the network.  Then, follow the steps below.

1. Install Etherseries on a server and restore the backup.

2. Connect the server to a 3+ network.

3.  Create a 3+ workstation boot disk and choose the option for
"3+ Workstation with Ether"; this loads the epath.sys driver
in Runminds and will allow you to access an EtherSeries
server on the 3+ network.

4. Log in and link to 3+ sharenames,

5. Do an EtherSeries Login and EtherSeries Link to access the
EtherSeries volumes,

6. Copy FROM the driver linked to EX TO the drive linked to 3+.


Another way to transfer data from EtherSeries to 3+ is to install
EtherSeries to the server, restore the backup, link to the
EtherSeries volumes and copy the files to a local hard or floppy
disk.  Depending on the amount of data to tranfer and the size of
the files, this may be an easier way to move files.

Or, if you have an extra server to keep on-line, you can install
EtherSeries and restore the backup, then leave the EtherSeries
server on the network.  Load the epath.sys drive in RunMinds; then
it can be accessed as in the first series of steps, above.

