Ref: 11630015
Title: "NETSETUP Aborting" Message Due to Insufficient Base Memory
Date: 9/28/90

Copyright 3Com Corporation, 1991.  All rights reserved.

While in a console connection on a 3S/5xx server and running the NETSETUP
program, the following error may appear:

      NETSETUP ABORTING: Out of dynamic memory !

This can happen if you have accidentally defined the wrong amount of base
memory on your server.  When selecting base memory, the first available
choice is 640K.  However, the correct choice for most 3+Open installations
is 896K.  If you accidentally press Select when the selection shows 640K,
you will see the NETSETUP ABORTING error the next time you enter NetSetup.

To change the memory setting, follow these steps:

1.  Hold down Select and press Reset, then release Reset.  Hold down Select
for a few more seconds and release it.

The LCD will read:  A. Boot Method
                       Select or Cont

2.  Press Cont.

The LCD will read:  B. Base Mem Size
                       Select or Cont

3.  Press Select.

4.  Press Cont to see the choices 640K, 768K, 832K, and 896K.  When the LCD
shows 896K, press Select to put an asterisk (*) by the 896K.

The LCD will read:  A. Boot Method
                       Select or Cont

5.  Press Reset to boot the server.
