Ref: 11030017
Title: Common 3+ Error Messages
Date:  07/27/88

Copyright 3Com Corporation, 1991.  All rights reserved.

*Cannot DE-INSTALL non-existent service.

Meaning: You are trying to deinstall a service that was not
recognized as being installed.

Action: Check the 3INSTALL program's menu of installed
services to review which services are actually
installed on the server.


*Cannot start up in concurrent server mode.

Meaning: The files that allow the PC server to be used as a
workstation are missing.

Action: Copy the following files from the 3+ User #1
diskette to the \3ROOT directory on the server's
hard disk:

NB.COM
MINSES.EXE
MSREDIR.EXE
SETNAME.EXE
PRTSC.EXE

When the files have been successfully copied to the
\3ROOT directory, reboot the server.

If the problem persists, reinstall the 3+ software
using the INSTALL program described in Chapter 2
of this guide.


*Entry (number) in configuration file has invalid printer type.

Meaning: Invalid information exists in the profile used by the
3SHARE program.

Action: Reconfigure the 3SHARE Print service parameters.
See Chapter 5 of this guide for more information.
If the error persists, reinstall the software.


*Installation program does NOT exist!

Meaning: The 3INSTALL program does not exist.

Action: Copy the 3INSTALL.EXE program from the 3+
Installation #3 (3INSTALL) diskette to the
\3PLUS\3CONFIG directory and retry the operation.
If this procedure does not work, reinstall the
software.


*Parameters set too high for available memory.

Meaning: This message is displayed if you have tuned
parameters in such a way that too much memory is
required to use the configuration and you tried to
keep the parameter settings.

Action: You cannot keep such a configuration.  The
parameters must be decreased to free memory.


*Service cannot be UPGRADED

Meaning: The service specified to be upgraded does not have
a batch file specified in the SERVICES.DAT data
file to upgrade it.

Action: Verify that you have selected the correct service to
be upgraded for the server, or that you are using
the correct command (Upgrade instead of Install,
for example).


*Service cannot MIGRATE to 3Plus 1.1

Meaning: The service specified to be migrated does not have
a batch file specifed in the SERVICES.DAT data file
to enable the migration.

Action: Verify that you have selected the correct service to
migrate for the server, or that you are using the
correct command (Migrate instead of Upgrade, for
example).


*This diskette was not installed using the EtherLink card present
in this PC.
Error [xxx]  Please verify your installation procedures.

Meaning: The diskette was installed on a different computer.

Action: Use the diskette in the correct computer or use the
correct diskette in the current computer.


*3Start Server copy protection detection failed.

Meaning: You have attempted to run a 3+ service on a server
on which it was not installed, or you have
incorrectly installed a 3+ service.

Action: You can run 3+ services only on the server on
which they were installed.  If it is an installation
error, reinstall the service according to the
instructions in this guide.

01/30/88
