Ref: 11020020
Title: Fix for Slow Printing After Maintenance Release Upgrade
Date: 7/27/90

Copyright 3Com Corporation, 1991.  All rights reserved.

When you update your system with the 3+Open 1.1e Maintenance Update
Diskettes, it will replace any specially tuned parameters with default
values.  Thus, it is a good idea to print out your LANMAN.INI configuration
before updating the system, so you will have a record of the pre-update
settings.

For example, a customer had been running Freelance on a 3+Open 1.1 network
before he updated his system with the 1.1e Maintenance Update Diskettes.
After the update, a large graphics file that had printed fairly quickly
before the update now took over 12 minutes to print.  By increasing the
NUMFILETASKS= parameter in the LANMAN.INI file from the default of 6 to 8,
the print job took only 3 minutes.
