Ref: 10420004
Title: Release Notes: CS/50 TCP booting from NCS/2 version 13010
Date: 6-16-88

Copyright 3Com Corporation, 1991.  All rights reserved.

Software Release

SW/50-TCP-NCS/2 Version 13010

June 16, 1988

Part Number: 86-0178-00
Revision 00


TO:          CS/50 Users

FROM:        Bridge Communications, Inc.

SUBJECT:     SW/50-TCP-NCS/2 Version 13010

DATE:        June 16, 1988

Enclosed is a distribution tape cartridge containing SW/50-TCP-
NCS/2 Version 13010 (part number: 83-0132-02) to be used with a
CS/50.

This release memo describes the compatibility of SW/50-TCP-NCS/2
Version 13010.  It also includes information on the software that
has not been included in the manuals.

Compatibility

SW/50-TCP-NCS/2 Version 13010 operates with the following
products and software releases:

.br;NCS/150 running SW/150-TCP-NCS Version 10000 or later
.br;NCS/AT running SW/AT-NCS Version 10000 or later
.br;NCS/2 running SW/2-NCS Version 10000 or later
.br;CS/1 running SW/1-TCP Version 13000 or later
.br;CS/1-SNA running SW/1-T-SNA Version 13000 or later
.br;CS/100 running SW/100-TCP Version 13000 or later
.br;CS/200 running SW/200-TCP Version 13000 or later
.br;GS/1-IP running SW/20-IP-X.25 Version 10000 or later
.br;GS/3-IP running SW/3-IP Version 10000 or later
.br;IVECS running SW/IVECS-TCP Version 13010 or later
.br;Personal computer running TCPTerm Version 10000 or later
.br;Personal computer running SW/1-PCS Version 10000 or later

Table 1 illustrates hardware and firmware compatibility of
SW/50-TCP-NCS/2 Version 13010. ''

__________________________________________________
|     Table 1  Hardware/Firmware Compatibility    |
|_________________________________________________|
| Product|      Software     |       Firmware     |
|        |                   |                    |
|        |                   |          MP        |
|        |                   |                    |
|  CS/50 |   SW/50-TCP-NCS/2 |   E2 MMON Rev. 00B |
|________|___________________|____________________|



Software_Installation

Before the CS/50 can run SW/50-TCP-NCS/2 Version 13010, you must
install the software on an NCS/2 and then bind the CS/50 to the
NCS/2.  Follow the instructions in the NCS/2 Installation and
Operation Guide for the software installation procedure and the
binding procedure.

Miscellaneous

A CS/50's port matches the terminal's baud rate when operating in
Autobaud mode.  If AutoBaud is selected and the terminal is
operated at 150 baud or higher, press the Return key after
powering on the terminal.  Enter the <RETURN><RETURN> key
sequence if the terminal is operated at 134.5 baud or lower.  The
terminal may have a baud rate between 50 baud and 19.2K baud.  If
AutoParity is selected, a <RETURN>.<RETURN> sequence must be
entered for baud rates of 150 or higher.  A
<RETURN><RETURN>.<RETURN> sequence should be entered for baud
rates of 134.5 or lower.  AutoBaud and AutoParity are the default
setting for terminal ports.

Documentation

The following manuals are shipping with SW/50-TCP-NCS/2 Version
13010:

+ Connection Service User's Guide (6/88)
(Part number: 09-0063-03)

+ Network Management Guide (9/87)
(Part number: 09-0067-02)

+ Configuration Guide (2/88)
(Part number: 09-0093-01)

+ Getting Started Guide (2/87)
(Part number: 09-0043-01)

+ Series/50 Installation Guide (5/88)
(Part number: 09-0115-01)

The following manuals provide related information:

+ LAN Planning Guide (2/88)
(Part Number: 09-0085-01)

+ NCS/2 Installation and Operation Guide (2/88)
(Part Number: 09-0110-01)

If you have any questions, contact an authorized Bridge service
respresentative for assistance.

