Ref: 09930013
Title: Running Novell Netware 2.1x or Above on TokenLink Adapters
date: 5/10/91

Copyright 3Com Corporation, 1991.  All rights reserved.

The TokenLink adapter handler to run with Novell Netware 2.1x and
above is located on the TokenLink Diagnostic Software diskette
(P/N 3636-04 or higher).  The Tokenlink Diagnostics Software
diskette can be downloaded from Ask3Com:  use file 3COMREUI.EXE,
dated 10/06/88 or later.

Note:  The 3COMREUI.EXE file dated 5/28/87 will not work.

Before installing the file, verify that the TokenLink adapter on the
workstation passes diagnostics.  (This is only for the workstation, not
the server, which uses the IBM Token Ring adapter.)  The workstation's
CONFIG.SYS and AUTOEXEC.BAT files should look like this:

CONFIG.SYS:
   files=20
   buffers=20

AUTOEXEC.BAT:
   3COMREUI Int, I/O base, DMA, LAN address (for example: 3,300,1)
   ipx
   net3 (or net4, depending on the DOS version)


For the IPX shell, the admin should select "IBM Token Ring Adapter" if
using Netware 2.1x.  If using Netware 3.x, the admin should select "IBM LAN
Support Program."  There is no listing for TokenLink.

