Ref: 09020010
Title: Changing the Serialization Option for 3+SNA
date: 8/1/89

Copyright 3Com Corporation, 1991.  All rights reserved.

For 3+SNA it is recommended to set the NetBIOS interrupt of 5C.
To do this, you must change the serialization option to 5C.  The
following steps describe this procedure for a netstation and for
a 3+SNA gateway.


For a Netstation

1.  Run MPINSTAL.

2.  Select the option GATEWAY WORKSTATIONS.

3.  Select or enter the appropriate node name.

4.  Press [Return].

5.  Select NETWORK SLAVE STATION.

6.  Press [Return].

7.  Choose SERIALIZE option and change 00 to 5C.

8.  Reboot the netstation.


For a 3+SNA Gateway:

1.  Run MPINSTAL.

2.  Select the option GATEWAY WORKSTATIONS.

3.  Select or enter the appropriate node name.

4.  Press [Return].

5.  Select SNA/SDLC GATEWAY STATION.

6.  Press [ESC] twice.

7.  Choose SERIALIZE option and change 00 to 5C.

8.  Reboot the gateway.
