Ref: 08040004
Title: Using RNB.com with 3+Remote
Date: 07/13/88

Copyright 3Com Corporation, 1991.  All rights reserved.

2400 baud case:  RNB.COM was created to be used with Telebit modems and
NetConnected workstations.  It should not be used with 2400 baud
modems except at the standard remote settings of 1 transmit and 1
receive window.  It may work at other settings but it has not
been tested and should not be recommended to customers for that
reason.

NetConnect case:  When running RNB from a NetConnected workstation
the appropriate transmit and receive windows are 4 3 or 7 6.  The choice
of these is dependent on the server configuration.  If your share server
is a 3server and it has greater than 8 receive and transmit
buffers you can use the larger parameters of 7 6 otherwise use 4
3.  Using larger transmit and receive windows than the
recommended will not improve your performance significantly and
will take up more memory.  Each buffer that you configure for RNB
takes approximately 1600 bytes of memory.

Telebit case:  The technical notes of December or January
gave the definitive explanation for using Telebit modems.
However, approximately the same parameters that are used for
NetConnect should be applied to the Telebit case.
