Ref: 07000020
Title: EPATH and Remote PC's
Date: 07/29/88

Copyright 3Com Corporation, 1991.  All rights reserved.

Can you run EPATH on a 3+ Remote workstation?

Answer:

Yes, the following must be done:

1. Place enet.sys in the config.sys file with all the other
3+ drivers for the remote PC.

2. Add mindsdrv to the runminds line in autoexec.bat file.

When you do place EPATH.SYS in a remote PC and add the
mindsdrv it will pass EtherSeries through the modem to local
area network. This is not documented or supported but it does
work.

Remember that remote pc will be using a com: port. This is
going to be interrupt driven. The Etherlink card that the
driver enet.sys is trying to talk to is not interrupt driven
BUT might cause unpredictable results. So make sure all the
drivers and hardware match with interrupts so no problems
will occur.
