Ref: 06430011
Title: Parity Errors on 3Com Servers with Minimum RAM Configurations
Date: 4/9/90

Copyright 3Com Corporation, 1991.  All rights reserved.

As stated in the 3+Open for 3Servers Version 1.1 Release Notes, a
3Com server with minimum RAM configurations (below 6 MB) will fail
on boot after installation if the factory default parameter
values are used.  Specifically, the "diskcache=" statement in the
CONFIG.SYS file is set to 2 MB by default, and must be lowered to
640 KB.  For servers with less than 6 MB RAM and a "diskcache=2048"
statement in the CONFIG.SYS file, the server will fail during the
boot process immediately following the POST tests.

To solve the problem, establish a console connection and change the
"diskcache=2048" parameter to a lower value, such as 640 KB.  Then reboot
the server to allow it to initialize properly.

