Ref: 04400014
Title: IBM AT's and 3+Start
Date: 7-20-88

Copyright 3Com Corporation, 1991.  All rights reserved.

3+Start will work with IBM ATs and AT Clones in most cases. The
following is a list of known problems running 3+Start with an AT
class machine.

1.  3+Start will not work with a hard disk. (It will work in some
cases but would have to do an "3s unlink " to use the hard
disk - recommend Start NOT be used with a hard disk).

2.  90% of ATs without hard drives use 1984 proms.  3+Start won't
work with ATs that have 1984 proms! Check the date on their
prom and if necessary upgrade  proms before using 3+Start.

3.  The address jumper setting has to changed from the factory
setting of EC00 to CC00.

4.  The Enable/Disable jumper needs to be set to Enabled.

5.  3+Start works with DOS 3.1 or higher only.

6.  The ROM BIOS date must be June 10, 1985 or newer (for IBM
ATs).
