Ref: 03250435
Title: CS/1 SNA Troubleshooting Configuration Checklist
Date: 6/9/88

Copyright 3Com Corporation, 1991.  All rights reserved.

Before calling for technical assistance with a CS/1 trouble-
shooting problem, you should have available the information
outlined in the Troubleshooting Configuration Checklist which
follows.

                    CS/1 SNA INTERFACE
          Troubleshooting Configuration Checklist


        CS/1 SNA DEVICE INFORMATION:

        Customer:

        SW Version:

        FW: Version:

        #SIO Bds:


        HOST COMPUTER INFORMATION (See Device Table)

        Make: [] IBM   Model:______________

              [] Other ___________________________________________________

        Front End Processor: [] IBM 370X   [] IBM 372X   [] Other ________

        Access Method: [] ACF/VTAM  [] ACF/TCAM  [] ACF/VTAME

                       [] Other______________________________

        Front End Software: [] NCP   [] Other_____________


        LINE INFORMATION

        Total number of SDLC lines to connect to the network: ____________

                Number of POINT-TO-POINT lines:_______________

                    Number of MULTIPOINT lines:_______________


        SDLC HOST DEVICE INFORMATION

                                    DEVICE TABLE
                                    ============

                         1  -  3705               Front End Processor
                         2  -  Series-1
                         3  -  System 32
                         4  -  System 34
                         5  -  System 38
                         6  -  8100
                         7  -  37x5
                         8  -  IBM 3705 compatible
                         9  -  Other________      __________________
                        10  -  Other________      __________________
.PG

            SDLC TERMINAL DEVICE INFORMATION

The  CS/1  Terminal  Interface is  compatible  with  3270
Terminal equipment. Please check the device model number below.


                     DEVICE TABLE
                     ============

   1  -  3271-11,12         Control units
   2  -  3274-1C,31C,51C    Control unit
   3  -  3275-11,12         Control unit
   4  -  3276-1,2,3,4       Control unit/display
   5  -  3276-11,12,13,14   Control unit/display
   6  -  3601,3602,3614,3624(3600) Finance communication
   7  -  3631,3632(3630)    Plant communication
   8  -  3651-A50,B50(3650) Retail store system
   9  -  3684(3680)         Programmable store
  10  -  3767-1,2,3         Communication terminal
  11  -  3771-1,2,3         Data communication
  12  -  3774-P1,P2         Data communication
  13  -  3775-P1            Data communication
  14  -  3776-1,2,3,4       Data communication
  15  -  3777-1,3           Data communication
  16  -  3791(3730,3790)    Communication system
  17  -  4701(4700)         Finance communication
  18  -  5251-12(5250)      Display/controller
  19  -  5294(5250)         Control unit
  20  -  5280(5280)         Distributed data system
  21  -  5520(5520)         Administrative system
  22  -  5937(5937-SO1)     Industrial terminal
  23  -  6670(6670)         Information Distributor
  24  -  8130,8140(8100 DPCX,DPPX) Information system
  25  -  8775-11,12(8775)   Control unit/display
  26  -  Series-1
  27  -  System 32
  28  -  System 34
  29  -  System 38
  30  -  Other:__________   ____________________
  31  -  Other:__________   ____________________
  32  -  Modem:_________________________________
  33  -  Modem:_________________________________
  34  -  Modem:_________________________________
  35  -  Modem:_________________________________
.PG

                                NCP SYSGEN PARAMETERS


1. Line ID:____________________

2. Line Speed: [] 2400   [] 4800   [] 9600   [] Other:____________

3. DTR/DSR Signalling:   [] Required   [] Not required

4. RTS/CTS Signalling:   [] Required   [] Not required

5. Window size ( ) for this line; i.e., the maximum number of
frames which may be transmitted before you have to wait for an
acknowledge-ment. (The default vaule of 7 is recommended.)

6. Specify the maximum number of frame retransmissions ( ) for this
line.

7. Value of Polling Timer: ___________________

8. Specify the length of time between frame retransmissions (   )
seconds for this line.

9. Control Unit Address: ____________________

10. Data Mode: [] Half-duplex   [] Duplex

11. Line Configuration: [] Point-To-Point   [] Multipoint

12. If Multipoint Line, specify the maximum number of stations to
be polled: ____________________

13. Provide stations addresses to be polled: ____ ____ ____ ____ ____
 ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____

14. Frame Size: __________

.PG


        The  CS/1 SNA Interface is compatible with some Personal
        Computers and emulation packages.  Please  provide the
        following information.

 Personal Computer       Interface Card         Software Package

____________________     ____________________     _____________________

____________________     ____________________     _____________________

____________________     ____________________     _____________________

____________________     ____________________     _____________________

____________________     ____________________     _____________________

____________________     ____________________     _____________________

