Ref: 03250420
Title: PCS/XNS X.3 Parameter Defaults in XNSDBAPI.EXE
Date: 3/17/88

Copyright 3Com Corporation, 1991.  All rights reserved.

Here is the information on X.3 parameter default settings in PCS/XNS
that are stored in XNSBAPI.EXE.

                          X.3 Parameters
                          ==============
#   Name                  Default                 Supported  Used

1.  Escape from DTM       1 - Escape possible     Yes        No
2.  Local echo            0 - Off                 Yes        Yes
3.  Data forwarding char  0 - None                Yes        Yes
4.  Idle timer            3 - .15 sec.            Yes        Yes
5.  Flow control from     1 - use flow control    Yes        No
6.  Interaction           0 - No service signals  No         No
7.  Break action          4 - In-band             Yes        Yes
8.  Data delivery         0 - Normal              Yes        Yes
9.  CR delay              0 - No delay            No         No
10. Line folding          0 - Disable             No         No
11. Baud rate             15 - 19,200 bps         No         No
12. Flow control to       1 - Use flow control    Yes        Yes
13. Linefeed insertion    0 - None                Yes        Yes
14. LF delay              0 - No delay            No         No
15. Editing               1 - No local editing    Yes        Yes
16. Character erase       0x08 - ^H               No         No
17. Line erase            0x15 - ^U               No         No
18. Line reprint          0x12 - ^R               No         No

                    Supported VTP Parameters
                    ========================
#   Name                  Default                 Supported  Used

27. EOM Character         0 - Disabled            Yes        Yes
