Ref: 03250401
Title: Configuring Teac 96 tpi Drives in NCS/150 & CS w/MCPU20
Date: 3/21/88

Copyright 3Com Corporation, 1991.  All rights reserved.

The information on how to set strapping on NCS/150 Teac 96tpi
drives is available in the release memo for the MCPU20 (68020
processor) upgrade kit for the CS/1-A and CS/1-SNA. The part
number for this release memo is 86-0117-00.

The configuration of the 96tpi drives is identical on the CS
products with MCPU20 and on the NCS/150, so the information
provided can be used to check the setup of drives for the NCS/
150.

Since Teac supplies several different 96tpi drives, configuration
for each is included in the memo.

Note that the MCPU20 requires the 96 tpi drive and does not
support the 48 tpi drive used with the 68000-based versions of
the CS products.
