Ref: 02880027
Title: Etherlink II TP and Synoptics
date: 4/9/90

Copyright 3Com Corporation, 1991.  All rights reserved.

The Etherlink II TP adapter (P/N 3C503-TP) is used for 10BaseT
connections.  To install it in a PC to work with a Synoptics multiport
repeater, set the adapter jumpers as follows:

DC SIG:         ON
XMIT LEVEL:     LOW
THRESHOLD:      LOW
EQUAL:          RX
LINK PULSE:     OFF

Also, make sure that the adapter impedance selection matches the
measured impedance of the twisted pair segment being used.

